Stainless Fittings
Stainless fittings
-
-
A CAMLOCK Malecam-FemaleBSP 1/2" SS
AU$12.95Malecam-FemaleBSP 1/2" . The quick and easy way to disconnect and reattach components and hosing in different combinations around your brewery. We now stock Dixon brand camlocks which are top quality and only have 1 arm on the female cams so can open and close one handed. They match with the old brand we used to stock but not T&S female cams (haven't found any other brand that matches them sorry) Learn More -
B CAMLOCK Femalecam-Male BSP 1/2"
AU$15.95Femalecam-MaleBSP 1/2" . The quick and easy way to disconnect and reattach components and hosing in different combinations around your brewery. Learn More -
Ball Valve 1/2" ID 1.5" TC to 1/2" Female NPT
AU$49.00Out of stock
1/2" BSP 3 Piece Full Bore Ball Valve SS 316 Learn More -
BALL VALVE 2 Piece Full Bore 1/2" BSP SS
AU$26.951/2" BSP 2 Piece Full Bore Ball Valve for everywhere a ball valve is required. Learn More -
Bulkhead 100mm
AU$29.95Out of stock
100mm stainless bulkhead, the easiest way to add a connection to an aluminium vessel or other vessel that can't be welded for one reason or another. This set is provided with the seals, washers and locknuts necessary to provide a solid watertight bulkhead in minutes. Just drill a 22mm hole, clean off the burrs and insert the bulkhead from the inside with the silicon seal against the inside wall and the thread poking through. Place a washer on the outside and then the locknut. Tighten, and you have something to attach ball valves and pickup tubes to. Also available in 50mm and 75mm lengths, see related products. Learn More -
Bulkhead 50mm
AU$19.95Out of stock
50mm stainless bulkhead, the easiest way to add a connection to an aluminium vessel or other vessel that can't be welded for one reason or another. Perfect for replacing the plastic tap in an urn. Learn More -
Bulkhead 75mm
AU$24.95Out of stock
75mm stainless bulkhead, the easiest way to add a connection to an aluminium vessel or other vessel that can't be welded for one reason or another. This set is provided with the seals, washers and locknuts necessary to provide a solid watertight bulkhead in minutes. Just drill a 22mm hole, clean off the burrs and insert the bulkhead from the inside with the silicon seal against the inside wall and the thread poking through. Place a washer on the outside and then the locknut. Tighten, and you have something to attach ball valves and pickup tubes to. Also available in 50mm and 100mm lengths, see related products. Learn More -
C CAMLOCK Femalecam - Hosebarb 1/2" SS
AU$17.50Femalecam-Hosebarb 1/2" . The quick and easy way to disconnect and reattach components and hosing in different combinations around your brewery. This is the most popular option for hose ends. We now stock Dixon brand camlocks which are top quality and only have 1 arm on the female cams so can open and close one handed. They match with the old brand we used to stock and the T&S male cams. Learn More