Skip to Main Content »

Welcome to Beerbelly Brewing Equipment!

Your shopping cart is empty

Heating and Cooling

Items 1 to 9 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. /

    1.8m braided stainless steel LP Gas hose 1/4"BSPM x 1/4" BSPF

    AU$38.00

    1.8m braided stainless steel LP Gas hose 1/4"BSPM x 1/4" BSPF Learn More
  2. 2200 Watt Stainless Steel Heating Element

    2200 Watt Stainless Steel Heating Element

    AU$30.00

    2200 Watt Stainless Steel Heating Element Learn More
  3. /

    30 watt Fermentor Heat Belt KK

    AU$19.95

    Heat belt, used (often in conjunction with a temperature controller) to maintain a good brewing temperature during colder months. The belt wraps around the fermentor and heat is transferred to the contents. Learn More
  4. /

    40 watt Heat Wrap Matt KK

    AU$19.95

    Out of stock

    Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! The belt wraps around the fermentor and heat is transferred to the contents just like a big electric blanket for your beer :-) Learn More
  5. /

    Adjustable Magnetic Stirrer

    AU$79.95

    Out of stock

    This adjustable magnetic stirrer is ideally used with the 50mm or 80mm stir bar Note does not include flask Learn More
  6. /

    Cast Aluminium Cold Plate- 2 product lines

    AU$149.95

    These 2 product line cold plates are made from a thick cast aluminium plate which acts as a large heatsink to absorb heat efficiently from your beer. Inside the casting contains 2 x 304 stainless product lines which are 5.5 meters long and 6.5mm diameter. The inlets and outlets on the cold plate are the standard mfl threads. Learn More
  7. Heated Magnetic Stir Plate

    Heated Magnetic Stir Plate

    AU$164.95

    Out of stock

    Yeast Forge heated stir plate Yeast forge is an intelligent stir plate that's been designed especially for brewers. It helps you grow healthy, consistent yeast starters by providing a controlled environment for your yeast to propagate. Yeast Forge incorporates the same "tough-as-nails" digitally controlled stirring system as our older Digital Stirplate and takes it one step further by adding a temperature controlled heating system that keeps your starter at its ideal propagation temperature throughout fermentation. .**** Back in stock around 15/06/16**** Learn More
  8. HERMS COIL

    HERMS COIL

    AU$125.00

    A copper HERMS (Heat Exchanging Recirculating Mash System) coil. Used to exchange heat between two liquids without mixing them, for example running mash liquor up through the coil in a hot liquor tank in order to maintain mash temperature of step up mash temperature. This coil is 4.5 metres long and usually fashioned into a 280-300mm approx circle, and terminated in the fashion shown. Supplied with 2 x stainless steel 1/2" compression fittings to screw into female fitting in your vessel. This coil would be easy enough to manipulate without tools to suit any vessel from 350mm to 600mm diameter, just by spreading out the coils a bit. Learn More
  9. /

    High Pressure LPG Burner with Stand and Regulator

    AU$169.00

    A powerful, versatile burner, suitable for small or large boils. Learn More

Items 1 to 9 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
 
© 2012-2018 Au Courant Pty Ltd. All Rights Reserved.